FLET’S Hikari Next / Premium

Required Connected Devices

FLET’S Hikari Next

In order to use FLET'S Hikari Next, a dedicated optical fiber connected device is required.
Please check and prepare it.

Items Prepared by the Customer

LAN cable (100BASE-TX cable)

LAN cable (100BASE-TX cable)
[With Hikari Denwa contract]
This cable is required in order to connect your computer to the Hikari Denwa home gateway with integrated ONU.
[Without Hikari Denwa contract]
This cable is required in order to connect your computer to the ONU.

LAN board or LAN card

LAN board or LAN card
Required if your PC is not equipped with a 100BASE-TX interface.
* A 10BASE-T interface can also be used, but the maximum transmission speed is 10 Mbps.

Items Provided by Your NTT West Installation Technician after Applying

FLET'S Hikari Next Easy Setup Guide (with CD-ROM)

FLET'S Hikari Next Easy Setup Guide (with CD-ROM)
A tool to perform the necessary setup in order to use FLET'S Hikari Next.
* Only 1 startup CD-ROM (1 license) is mailed for a single contract.
* Only guaranteed to operate on a Japanese language operating system. Be aware that it may not operate on an operating system in languages other than Japanese.

Items Prepared (Installed) by NTT West after Applying

With Hikari Denwa contract

Hikari Denwa Home Gateway with Integrated ONU (HGW)

For customers with a contract for Hikari Denwa, NTT West lends a Hikari Denwa HGW with integrated ONU (integrated router function) as a rental.

The ONU (or residential VDSL device) and Hikari Denwa home gateway may also not be integrated in some situations.
*
100 VAC power source is required.
Without Hikari Denwa contract

Optical Network Unit (ONU)

This device is installed in the customer's home and converts the signal from the optical fiber into a 100BASE-TX Ethernet signal. NTT West lends this device as a rental.

* 100 VAC power source is required.

▲Page Top

FLET’S Hikari Premium

In order to use FLET'S Hikari Premium, a dedicated optical fiber connected device is required.
Please check and prepare it.

Items Prepared by the Customer

LAN cable (100BASE-TX cable)

LAN cable (100BASE-TX cable)
This cable is required in order to connect your computer to the customer network terminating unit (CTU).

LAN board or LAN card

LAN board or LAN card
Required if your PC is not equipped with a 100BASE-TX interface.
* A 10BASE-T interface can also be used, but the maximum transmission speed is 10 Mbps.

3 or more power sockets

3 or more power sockets
To use the service and install the ONU, CTU, and Hikari Denwa VoIP adapter, in addition to the power socket for the Internet connection terminal equipment (e.g. PC), you will need 3 or more power sockets*.
Additionally, since the power adapters are relatively large, when purchasing a power strip, select one with more sockets than actually required.
* If not using "Hikari Denwa", prepare a power strip with 2 or more sockets.
* NTT West recommends a power strip with surge protection.

Items Provided by Your NTT West Installation Technician after Applying

Startup CD-ROM & Setup Manual

Startup CD-ROM & Setup Manual
A connection tool to setup the necessary environment on a PC in order to use FLET'S Hikari Premium. After delivery, you will install this on your computer yourself.
* Only 1 startup CD-ROM (1 license) is mailed for a single contract.
* Only guaranteed to operate on a Japanese language operating system. Be aware that it may not operate on an operating system in languages other than Japanese.

Items Prepared (Installed) by NTT West after Applying

Family Type

Optical Network Unit (ONU)

This device converts the signal from the optical fiber into a 100BASE-TX Ethernet signal. The optical network unit requires 100 VAC power source.

Customer Network Terminating Unit (CTU)

This device terminates the line and sets the necessary information for IPv6 network communications. 100 VAC power source is required.

Apartment Type

Stand-alone VDSL

Stand-alone VDSL
As the device on the opposite end of multi-unit VDSL, it is connected to the telephone line in each apartment. The maximum transmission speed of stand-alone VDSL is 100 Mbps.
100 VAC power source is required.
* You will receive either type.

Customer Network Terminating Unit (CTU)

Customer Network Terminating Unit (CTU)
This device terminates the line and sets the necessary information for IPv6 network communications. 100 VAC power source is required.
* You will receive either type.

▲Page Top

審査 13-1643-1